欧美综合久久,91在线软件,欧美10p

PRODUCTS

Recommended products

Your current location: ProductsRubber Lined ValveRubber Lined Diaphragm Valve

G41G Rubber Lined Diaphragm Valve

Product overview

Product model: G41G
Nominal diameter: DN65~200mm
Nominal pressure: PN10~16MPa
Drive mode: worm gear drive, electric, pneumatic, manual
Applicable temperature: -40℃ ~ 100 ℃
Applicable medium: good acid and alkali resistance.85% fluid acid, hydrochloric acid, hydrofluoric acid, phosphoric acid, charged base and various esters
Main material: cast iron, ductile cast iron, carbon steel, stainless steel

G41G Rubber Lined Diaphragm Valve product details

G41G Rubber Lined Diaphragm Valve Features

1. This series of valves are the introduction, digestion and absorption of the United Kingdom Saunders Valve proprietary technology manufacturing products.

Liner diaphragm valve and other valves the biggest difference is that: the use of packing structure letter; rubber diaphragm can make the corridor in the corrosive media and all the drive components in a fully isolated state, thereby eliminating the usual valve " Run, run, drip, drain "and other defects.

3. Due to the smooth flow of diaphragm valve, flow resistance is small, so you can get a larger flow.

4. Depending on the diaphragm valve body cavity surface as the hall for the choice of a variety of rubber. It has excellent corrosion resistance.

5. Because the seal is a flexible rubber diaphragm. So it also has better sealing and the minimum closing force.

6. The valve by the valve body, valve cover, disc, stem, diaphragm and other drive components and other components.

7. Valve opening and closing is achieved by rotating the hand wheel. The valve marked on the top of the valve can be glimpsed at the valve opening or closing the display color to indicate the valve opening and closing stroke. When the handwheel is placed clockwise, the handwheel is moved downward, and the valve disc is driven to lower the diaphragm to cut off the passageway; otherwise, the valve is opened and the color is revealed.

8. The standard valve: in accordance with the provisions of GB12239 and meet the requirements of BS5156.

G41G Rubber Lined Diaphragm Valve product use

G41G Rubber Lined Diaphragm Valve produced and sold by Baigang valve group according to different depending on the material for different temperatures at different fluid medium pipeline, as the flow control of the opening and closing institutions

G41G Rubber Lined Diaphragm Valve depending on the recommended range of use of the material

Depending on the material (code)	proper temperature	Suitable media
Hard rubber (NR)	-10 ℃ ~ 85 ℃	Hydrochloric acid, fluorosilicic acid, formic acid and phenolic acids, hydrochloric acid, 30% of flow acid and 50% of hydrofluoric acid are used in addition to strong oxidizing agents (such as pinacid, chromic acid, concentrated sulfuric acid and hydrogen peroxide) Acid, 80% phosphoric acid, alkali, salts, metallized solution, sodium hydroxide, potassium hydroxide, neutral saline solution, 10% sodium hypochlorite, wet chlorine, ammonia, most alcohols, organic acids and aldehydes.
Soft rubber (BR)	-10 ℃ ~ 85 ℃	Has good wear resistance. Mainly used in 50% of the following acid, sodium hydroxide, potassium hydroxide, neutral salt bath solution and ammonia, cement, clay, cinder ash, granular fertilizer and abrasive solid fluid, thick Mucus and so on.
Butyl gum (IIR)	-10 ℃ ~ 120 ℃	Anti-corrosion, wear resistance. Very resistant to most organic acids, alkalis and hydroxides, inorganic salts and inorganic acid gas, alcohols, aldehydes, ethers, ketones, esters and so on.
Neoprene	(CR) -10 ° C to 120 ° C	Animal oils, vegetable and inorganic oils, and aggressive slurries with a wide range of pH values provide good abrasion resistance.
Cast iron is not wrapped	-40 ℃ ~ 100 ℃	Non-corrosive media

G41G Rubber Lined Diaphragm Valve diaphragm Recommended use of material:

Diaphragm material (code)	Suitable temperature	Suitable media
Butyl gum (Grade B)	-40 ℃ ~ 100 ℃	Good acid and alkali resistance. 85% flow acid, hydrochloric acid, hydrofluoric acid, phosphoric acid, base and a variety of esters.
Natural rubber (Q grade)	-50 ℃ ~ 100 ℃	For purifying water, inorganic salts, dilute mineral acids.

G41G Rubber Lined Diaphragm Valve main performance parameters:

model	Nominal diameter DN (mm)	Working pressure WP (Mpa)	Test pressure (Mpa)		Test temperature (℃)
			seal	strength
G41J W-16	20-50	1.6	1.76	2.4	Room temperature
G41J W-10	65-200	1.0	1.1	1.5

G41G Rubber Lined Diaphragm Valve main connection size

DN (mm)	PN (MPa)	WP (MPa)	Main dimensions (mm)										The scope of application	Weight (kg)
			L		D1	D	D0		Z	H	Temperature (° C)	medium		Weight (kg)
			J-type	W-type	D1	D	D0		Z	H	Temperature (° C)	J-type	W-type
20	1.6	1.6	121	117	75	105	70	13.5	4	103	Less than or equal to 100	Generally corrosive	Non-corrosive	3
25			131	127	85	115	83	13.5		112				4.3
32			150	146	100	140	114	17.5		144				6.5
40			163	159	110	150	114			156				7.9
50			194	190	125	165	140			177				10.6
65	1.0	1.0	220	216	145	185	165			164.5				17.6
80			258	254	160	200	230		8	181.5				25.5
100			309	305	180	220	280			253				36.2
125			362	356	210	250	280			282				47.5
150			412	406	240	285	368			366.5				74
200			527	521	295	342	483	22						143

Reminder:

All text, data and pictures in this article are for reference only.To see more details of the G41G Rubber Lined Diaphragm Valve performance parameters, structural dimension parameters, pricing, etc., or to request high quality printing samples, please Contact us.

Next：Normally Closed Pneumatic Diaphragm Valve

Previous：Fluorine Lined Diaphragm Valve