免费在线观看不卡av,成人免费b2b网站大全在线,日本高潮视频

PRODUCTS

Recommended products

Your current location: ProductsRegulating ValveAll Stainless Steel Nitrogen Seal Valve

All Stainless Steel Nitrogen Seal Valve

Product overview

Nominal diameter: DN20mm~150mm
Nominal pressure: 1.0, 1.6Mpa
Main material: HT200, ZG230 ~ 450 ZG1Cr18Ni9Ti
Spool, seat: 1Cr18Ni9Ti stellay alloy surfacing
Design standard: GB/T17213
Structure length: GB12221-89
Inspection standard: GB/T4213
Flange standard: JIS B220, JB/T79, ANSI B16.5-1981, GB/T9113, HG20594-97, HG20618-97, etc

All Stainless Steel Nitrogen Seal Valve product details

All Stainless Steel Nitrogen Seal Valve product description:

All Stainless Steel Nitrogen Seal Valve produced and sold by Baigang valve group, Pressure regulator without additional energy, the use of the media itself is the media as the power source. Automatically control the valve medium flow, so that the pressure after the valve to maintain a constant pressure stabilizer. Has been widely used in continuous gas acquisition and transportation of natural gas, urban gas and metallurgical, petroleum, chemical and other industrial production sector.
Valve Features: Control of high precision, general than ZZY type direct operation of the regulator about double high. Adjust the pressure ratio (such as the valve before 0.8MPa, valve 0.001MPa) is particularly suitable for micro-pressure gas control.
Pressure set in the pilot to achieve, so convenient, fast, labor-saving time-saving can be run continuously set.

All Stainless Steel Nitrogen Seal Valve part Information:

Body, bonnet: HT200, ZG230 ~ 450 ZG1Cr18Ni9Ti
Spool, seat: 1Cr18Ni9Ti Stellite alloy surfacing
Filler: Teflon putter, bushing: 2Cr13

All Stainless Steel Nitrogen Seal Valve technical Parameters:

Nominal diameter DN (mm)	20			25	40		50	80		100	150
Seat diameter (mm)	6	15	20	25	32	40	50	65	80	100	125	150
Rated flow coefficient KV	3.2	5	8	10	20	32	50	80	100	160	250	400
Pressure adjustment range Kpa	0.5 to 7 5 to 20 15 to 50 30 to 150
Nominal pressure PN (MPa)	1.0 1.6
The media temperature is adjusted (℃)	-20 ~ 90
Flow characteristics	Go ahead
Adjustment accuracy (%)	≤ 3
Actuator film effective area (cm 2)	200				280				400
Allow leakage	In line with ANSIB16.104-1976 level IV

All Stainless Steel Nitrogen Seal Valve specifications Weight:

◆ Overall dimensions

Nominal diameter (DN)	20	25	32	40	50	65	80	100	125	150
Flange end distance (L)	150	160	180	200	230	290	310	350	400	480
H	610	610	630	630	640	710	720	730	800	930
H1	330	330	350	350	360	430	440	450	520	650
φ	310								400
D	105	115	140	150	165	185	200	220	250	285
D1	75	85	100	110	125	145	160	180	210	240
D2	56	65	76	84	99	118	132	156	184	211
nd	4-14		4-18				8-18			8-22

Reminder:

All text, data and pictures in this article are for reference only.To see more details of the All Stainless Steel Nitrogen Seal Valve performance parameters, structural dimension parameters, pricing, etc., or to request high quality printing samples, please Contact us.

Next：All Stainless Steel Nitrogen Relief Valve

Previous：Nitrogen Supply Device (nitrogen Sealing Valve)